Black & Decker - 91-301/38301

Below are all the different types of Black & Decker. Select the device of your choice, to download the manual

Contents

First make sure that wires terminals or connections are free from grease or dirt clean with knife or fine emery cloth Be sure that the soldering tip has been freshly tinned When you press the switch button the work light will come on and the tip will start heating immediately In about 6 seconds with light pressure touch the tip to the connection and at the same time feed the solder to the spot being heated by the tip After enough solder melts tp just cover the connection release the button lift the tip and ejlpw solder to cool Do not disturb the connection until solder has hardened Pencil can be placed in the bench rest between operations and when charging Figure 6 Do not keep the switch button depressed longer than needed to make the connection ...